Power Sourc

PoE (IEEE802.3af compliant) or 12 V DC (use of the optional AC adapter)

Current Consumption

PoE: 140 mA, 12 V DC (AC adaptor): 390 mA

Power Consumption

5.5 W

Speech Method

Hands-free: Full-duplex (echo canceler + voice switch)

Audio Bandwidth

Conversation/Broadcast: 300 Hz - 7 kHz

Hands-free

Speaker: Dynamic type speaker, maximum output 2.0 W 
Microphone: Omni-directional digital MEMS microphone x 2

External Speaker

Maximum output 2.0 W, 8 0, push-in terminal (2 pins)

Signal Processing

Input channel: Gain, EQ x 2, Comp, AGC, noise canceler, echo canceler, voice switch, microphone array, speech intelligibility filter 
Output channel: Gain, EQ x 7, ANC

Network

Network I /F: 100Base-TX 

Network protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, RTSP, IGMP, NTP, SIP, FTP, RSTP Audio packet transmission method: Unicast, Multicast 

Number of broadcasting destinations: Unicast (max. 16), Multicast (max. 2999) Connector: RJ45 connector x 2 (LAN A ( PoE compatible), LAN B ( PoE incompatible)) Network cable: UTP (Cats or greater)

Audio Transmission

Sampling frequency: 16 kHz, 8 kHz (controllable on the software) Audio codec: PCM, G. 722, G. 711 µ-Law/A-Law 
Quantization bit depth: 16-bit 
Voice packet loss recovery: Silence insertion

Operation

Direct key x 1

Indicators

LED indicators: RUN (green) x 1, STATUS (yellow, red, green) x 1, Calling indicator (yellow) x 1, Conversation indicator (green) X 1, Unlock indicator (green) x 1

Control Input

4 channels, no-voltage make contact input, open voltage: 12 V DC, short-circuit current: 5 mA or less, push-in terminal (5 pins)

Control Output

1 channel, relay contact output, withstand voltage: 30 V DC, maximum control current: 1 A, push-in terminal (2 pins) 

4 channels, open collector output, maximum contact capacity: 30 V DC/100 mA, push-in terminal (5 pins) 4 channels, open collector output, maximum contact capacity: 30 V DC/100 mA, push-in terminal (5 pins)

Installation Method

Flush-mounting or wall-mounting

Impact Resistance 

IKO8

Dust/Water Protection

IP65 (Note that front cover edges must be sealed at installation.)

Operating Temperature

-40 ° c to +60° c

Operating Humidity

90 %RH (no condensation)

Finish

Case: Die-cast aluminum, silver, mat finish, paint Panel: PC resin

Dimensions

115 (W) x 162 (H) x 72.2 (D) mm

Weight

750g

Accessory

Waterproof washer ·-4, Tamper-proof screw ·-4

Option

AC adapter: AD-1210P, AD-121 SP

Compatible Box

For flush mount: 3-gang electrical box or Back Box YC-150 (option) 
For wall mount: Wall-mount Box YS-13A (option)