Power Supply

PoE (IEEE802.3af compliant) or 12 V DC (use of the optional AC adapter)

Current Consumption

PoE: 120 mA, 12 V DC (AC adapter): 340 mA

Power Consumption

4.5 W

Speech Method

Handset: Full-duplex 

Hands-free: Full-duplex (echo canceller + voice switch), Half-duplex (PTT)

Audio Bandwidth

Conversation/Broadcast: 300 Hz - 7 kHz

Hands-free

Speaker: Dynamic type speaker, maximum output 2.0 W Microphone: Omni-directional digital MEMS microphone x 2

Handset

Receive path: Dynamic type speaker Send path: Electret condenser microphone

Headset

Speaker: Dynamic type speaker, 32Ω, ø3.5 mm mini jack Microphone: Electret condenser microphone, ø3.5 mm mini jack

External Speaker

Maximum output 2.0 W, 8 0, push-in terminal (2 pins)

Signal Processing

Input channel: Gain, EQ x 2, Comp, AGC, noise canceller, echo canceller, voice switch, microphone array, speech intelligibility filter 
Output channel: Gain, EQ x 7

Network

Network I /F: 1 00Base-TX 
Network protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, RTSP, I GMP, NTP, SIP, FTP, 

RSTP
Audio packet transmission method: Unicast, Multicast 
Number of broadcasting destinations: Unicast (max. 16), Multicast (max. 2999) Connector: RJ45 connector x 2, LAN A (PoE compatible), LAN B (PoE compatible) Network cable: UTP (Cat5 or greater)

Audio Transmission Method

Sampling frequency: 16 kHz, 8 kHz (controllable on the software) Audio codec: PCM, G.722, G.711 µ-Law/A-Law 
Quantization bit depth: 16-bit 
Voice packet loss recovery: Silence insertion

Video Transmission Method

Video codec: H.264, MJPEG Resolution: HD 1280 x 720 (max. l Frame rate: 20 fps (max.)

Operation

Dial key, Direct key X10, Function 1, Function 2, Broadcast, Hold, Transfer, PTT, Cancel

Indicators

LCD: 16 characters x 2 lines 
LED indicators: RUN (green) x 1, STATUS (yellow, red, green) x 1

Control Input

2 channels, no-voltage make contact input, open voltage: 12 V DC, short-circuit current: 5 mA or less, push-in terminal (3 pins)

Control Output

2 channels, open collector output, maximum contact capacity : 30 V DC/100 mA, push-in terminal (3 pins)

Installation Method

Desktop installation or wall mounting (Wall mounting needs an optional bracket.)

Operating Temperature

0° c to +40 ° c 

Operating Humidity

90 %RH (no condensation)

Finish

ABS resin, dark gray

Dimensions

148 (W) X 78.9 (H) X 200 (D) mm

Weight

760g

Accessory

Stand ···1, Stand fixing screw ··-2, Zip tie ···2

Option

AC adaptor: AD-1210P, AD-1215P Wall mounting bracket: YC-1001