Power Supply

240 V AC 50/60 Hz

Rated Output

120 W

Power Consumption

180 W (rated output), 55 W ( based on EN62368 )

Audio Input

1 channel, -60 dB (*1)/-40 dB (*1)/-20 dB (*1)/0 dB (*1) selectable, 

10 kΩ, electronically balanced, phantom power supply available, removable terminal block (3 pins) 1 channel, -60 dB (*1)/0 dB (*1) selectable, 10 kΩ, electronically balanced, removable terminal block (3 pins)

Recording Output

1 channel, 0 dB (*1), 10 kΩ, electronically balanced, removable terminal block (3 pins)

Audio Bandwidth

200 Hz - 16 kHz

Signal to Noise Ratio

60 dB or more

Distortion

1 % or less at 1 kHz, rated power (20 kHz LPF (AUX-0025))

Speaker Output

10 channels, removable terminal block (10 pins x 2)

Output Voltage

100 V/70 V switchable

Volume Control

Audio input volume control x 2, Recording output volume control x 1, Speaker output volume control x 1

Signal Processing

Input channel: Gain, EQ x 2, Comp, AGC, Trim, Gate ( for VOX function) Output channel: Gain, EQ x 7, ANC

Network

Network I /F: 100BASE-TX 

Network protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, RTSP, IGMP, NTP, FTP, RSTP Audio packet transmission method: Unicast, Multicast 

Number of broadcasting destinations: Unicast (max. 1), Multicast (max. 2999) Connector: RJ45 connector x 2 
Network cable: UTP (Cat5 or greater)

Audio Transmission Method

Sampling frequency: 48 kHz, 16 kHz (controllable on the software) Audio codec: PCM, G.722 

Quantization bit depth: 16-bit 

Voice packet loss recovery: Silence insertion

Operation

Direct key x 10, Reset key x 1, CPU OFF switch x 1, Output voltage selection switch x 1, Input setting switch (input level setting (MIC/LINE selectable), phantom power setting) x 1

Indicators

LED indicators: LAN (green) x 2, POWER (green) x 1, RUN (green) x 1, 

STATUS (yellow, red, green) x 1, INPUT (green, red) x 2, 

REC OUT (green, red) x 1, OUTPUT (green, red) x 1, CPU OFF (red) x 1 Direct keys: SELECT (green) x 10, STATUS (yellow, red, green) x 10

Control Input

10 channels, no-voltage make contact input, open voltage: 24 V DC, short-circuit current: 5 mA or less, removable terminal block (12 pins x 2)

Control Output

10 channels, relay contact output, maximum contact capacity : 125 V AC/24 V DC, 4.0 A, removable terminal block (15 pins x 2)

Emergency Cutoff 24 V Input

1 channel, photo coupler input, input current: 5 mA or less, removable terminal block (2 pins)

Installation Method

Desktop, rack, or wall mounting (Rack or wall mounting needs optional brackets.)

Operating Temperature

0°c to +40 °c

Operating Humidity

90 %RH (no condensation)

Finish

Panel, Case: Pre-coated steel plate, black, 30% gloss Volume control section cover: ABS resin, gray smoke

Dimensions

420 (W) x 88.7 (H) x 326 (D) mm

Weight

6.6 kg

Accessory

Power cord (2 m (6.56 ft)) ···1, Removable terminal plug (2 pins) ···1, Removable terminal plug (3 pins) ···3, Removable terminal plug (2 pins) ···2, Removable terminal plug (10 pins) ···2, Removable terminal plug (15 pins) ···2, Plastic foot ··-4, Screw for fitting plastic foot ···4

Option

Wall mounting bracket: YC-850 Rack mounting bracket: MB-25B