24,200.00 āļāļēāļ
AM5215/26 (JBL) 2-Way Loudspeaker System with 1 x 15" LF
āļĢāļŦāļąāļŠāļŠāļīāļāļāđāļē : JBL-AM5215/26
| āļĢāļēāļāļē |
131,600.00 āļāļēāļ |
| āļāļģāļāļ§āļāļāļĩāđāļāļ°āļāļ·āđāļ | |
| āļĢāļēāļāļēāļĢāļ§āļĄ | 131,600.00 āļāļēāļ |
āļŠāļīāļāļāđāļēāđāļĄāđāđāļāļĩāļĒāļāļāļ
āļŠāļīāļāļāđāļēāļŦāļĄāļ
2-Way Loudspeaker System with 1 x 15" LF
The AM5215 is a medium power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential DriveÂŪ dual voice coil and dual magnetic gap 265H-1 380 mm (15 in) low frequency driver and 2408H-1 high frequency 38 mm (1.5 in) exit, 38 mm (1.5 in) voice-coil compression driver. The large format PTâĒ Progressive Transition waveguide provides excellent coverage in a variety of patterns. The waveguide is rotatable so the loudspeaker system can be used in either the vertical or horizontal orientation. High-slope passive networks minimize band overlap. Well-controlled off-axis response enhances arrayability.
Features
- 120° x 60° Coverage
- 265H-1 Differential DriveÂŪ Low-Frequency Driver
- 2408H-1 High-Frequency Compression Driver
- Large PTâĒ Progressive Transition waveguide for excellent pattern control and low distortion
- Rotatable waveguide for vertical or horizontal orientation
- Bi-Amp/Passive Switchable
- Bi-amp and Passive Mode FIR Tuning Set Delivers Optimized Frequency & Phase Response, Coverage Consistency, and Sound Quality
- Available in Black, White and WRC/WRX weather resistant finishes
Applications
- Performing Arts Facilities
- Theatrical Sound Design
- Auditoriums
- Worship Facilities
- Live Clubs
- Dance Clubs
- Sports Facilities
- Themed Entertainment Venues
IMAGES
āļ āļēāļāļŠāļīāļāļāđāļē
SPECIFICATION
āļāļļāļāļŠāļĄāļāļąāļāļīāļāļēāļāđāļāļāļāļīāļ
| Frequency Range (-10dB) | 35 Hz - 20 kHz |
| Frequency Response (Âą3 dB) | 41 Hz â 18 kHz |
| Coverage Pattern | /64: 60° x 40°/66: 60° x 60°/95: 90° x 50° /26: 120° x 60° |
| Directivity Factor (Q) | 14.5 |
| Directivity Index (DI) | 11.6 dB |
| Crossover Modes | Bi-amp/Passive switchable |
| Passive Crossover Frequency | 2 kHz |
| Transducer Power Rating (AES) | LF: 500 W (2000 W peak), 2 hrs350 W (1400 W peak), 100 hrsHF: 40 W (160 W peak), 2 hrs |
| System Power Rating | Passive mode: 350 W (1400 W peak), 100 hrs |
| Maximum SPL (1m) | Bi-amp mode:LF: 125 dB-SPL cont avgHF: 131 dB-SPL cont avg. |
| System Sensitivity (1w @ 1m) | Passive mode: 98 dB SPL |
| LF Driver | 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil |
| Nominal Impedance | 8 ohms |
| Sensitivity (1W @ 1m, within operational band) | 99 dB SPL |
| HF Driver | JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil |
| Sensitivity | 115 dB SPL |
| Waveguide | PT-H66HF-1 |
| Enclosure | Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood |
| Suspension Attachment | 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware |
| Finish | Black DuraFlexâĒ finish. White available upon request. |
| Grille | Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing. |
| Input Connector | NL4 Neutrik SpeakonÂŪ and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through. |
| Environmental | Mil-Std 810; IP-x3 per IEC529. |
| Dimensions (H x W x D in vertical orientation) | 783 x 422 x 504 mm(30.8 x 16.6 x 19.85 in) |
| Net Weight (each) | 25.0 kg (55 lb) |
| Optional Accessories | M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1 |
| System Power Rating | Passive mode: 350 W (1400 W peak), 100 hrs (IEC rated) |
| Nominal LF Driver Impedance | 8 ohms |
| Nominal HF Driver Impedance | 8 ohms |
