PS602 (BOSE) PowerShare Power Amplfifier

รหัสสินค้า : ยี่ห้อ BOSE รุ่น PS602

ราคา

47,900.00 บาท

จำนวนที่จะซื้อ
ราคารวม 47,900.00 บาท

สินค้าไม่เพียงพอ

สินค้าหมด

PS602 (BOSE) PowerShare Power Amplfifier

Product Description

Bose PowerShare PS602 adaptable power amplifier delivers 600 watts for fixed-install applications. Through patented technology, total amplifier power is shared across all output channels, allowing installers the freedom to utilize power where needed. With support for both low- and high-impedance loads up to 100V, PowerShare amplifiers adapt to a wide range of applications. Onboard configurable loudspeaker processing and direct access to zone controllers eliminate the need for an additional signal processor in many installations, while outstanding audio performance and reliability are assured with patented technologies inherited from the field-proven PowerMatch® line. This unique set of features and technologies makes PowerShare one of the most versatile high-performance amplifiers available.

Key Features

  • PowerShare Technology – Patented PowerShare technology allows the total 600 watts of power to be shared asymmetrically across all outputs, as each output
  • is capable of delivering full power. Instead of selecting amplifier power based
  • on the needs of the largest zone, installers now have the freedom to use total amplifier power in the application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
  • Load-Independent Outputs – Each channel can be configured for low-impedance (4-8 Ω) or high-impedance (70/100V) applications without bridging, use of jumpers, or software settings.
  • DFLTM System – The Dual Feedback Loop system, inherited from the field-proven Bose PowerMatch® amplifier line, improves performance and reliability through continuous monitoring and control of both the current and voltage delivered
  • to each output load. This combination provides improved linearity and lower distortion, while protecting loudspeakers.
  • Integrated Loudspeaker Processing with Optional PowerShare Editor Configuration – For applications requiring additional signal processing the PowerShare Editor Software offers real-time selection and control of Bose loudspeaker EQs, 9-band PEQs, matrix mixing, crossover, delay, and mute/output polarity through a USB connection. For basic setups without a PC, rear-panel settings allow installers to recall Bose loudspeaker equalization and protection per output channel. These features eliminate the need for an external signal processor in many applications.
  • ControlCenter Zone Controller Accessories – Bose ControlCenter CC-1 zone controllers can be directly attached for remote adjustment of amplifier outputs, further extending stand-alone amplifier applications.
  • Auto-Standby – Designed to save power consumption when not in use. PowerShare amplifiers can be configured to automatically enter standby mode when the audio signal falls below a set threshold, then wake when audio returns.

Applications

Designed for a wide range of applications, including:

  • Performing arts venues • Houses of worship
  • Conference centers
  • Retail stores
  • Restaurants and bars
  • Hospitality venues 
POWER RATING
Amplifier Power
2 x 300 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)
Maximum Power per Channel
600 W @ 4-8 Ω, 70/100V
Gain (Low-Z mode)
44 dB, RCA (unbalanced) inputs; 32 dB, Euroblock (balanced) inputs
Gain (70V mode)
47 dB, RCA (unbalanced) inputs; 35 dB, Euroblock (balanced) inputs
Gain (100V mode)
50 dB, RCA (unbalanced) inputs; 38 dB, Euroblock (balanced) inputs

 

AUDIO PERFORMANCE
Frequency Response
4-8 Ω: 20 Hz – 20 kHz (+/- 0.5 dB @ 1 W); 70/100V: Same as 4-8 Ω with 50 Hz high-pass filter
Channel Separation (Crosstalk)
> 85 dB @ 1 kHz, > 65 dB @ 20 kHz
Signal to Noise Ratio
100 dB (at rated power, A-weighted)

 

AUDIO INPUTS
Input Channels
2 unbalanced, 2 balanced
Connectors
Stereo RCA, 3-pin Euroblock
Input Impedance
10 kΩ (RCA), 20 kΩ (Euroblock)
Maximum Input Level
20 dBu (at 12 dBu sensitivity setting)
Sensitivity
-10 / -2 dBV, RCA inputs; 4 / 12 dBu, Euroblock inputs (low / high sensitivity)

 

AUDIO OUTPUTS
Outputs
2
Connectors
2-pin inverted Euroblock

 

INTEGRATED DSP
A/D and D/A Converters
24-bit / 48 kHz
Processing Functions
Matrix mixer, loudspeaker EQ, real-time 9-band PEQ, Vpeak/Vrms limiters, delay, band pass, mute/output polarity inversion
Loudspeaker Presets
Flat, DS16, DS40, DS100, FS3B, 402, 802, MA12EX, RMU105 and RMU108
Audio Latency
< 1 ms (any input to speaker output)

 

INDICATORS AND CONTROLS
Power LED
Solid green: Power is on. Blinking green: Unit is in standby mode. Solid amber: Thermal fault. Solid red: Supply fault.
Input Signal LED
Green: Signal present. Amber: Input is near clipping. Red: Input is clipping. Solid red: Indicates a fault.
Output Limit LED
Amber: Amplifier limiting an output. Blinking red: Amplifier muted. Solid red: Indicates a fault.
Controls, Front Panel
Power On/Off
Controls, Rear Panel
Amplifier mode DIP switches, loudspeaker EQ dials, output attenuators

 

ELECTRICAL
Mains Voltage
100 VAC – 240 VAC (±10%, 50/60 Hz)
AC Power Consumption
120 VAC: 14 W (Standby), 700 W (Max)
230 VAC: 14 W (Standby), 700 W (Max)
Mains Connector
Standard IEC (C14)
Maximum Inrush Current
14.14 A (230 VAC / 50 Hz), 8.04 A (120 VAC / 60 Hz)
Protections
High temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage

 

PHYSICAL
Dimensions (H x W x D)
44 mm x 483 mm x 414 mm (1.7” x 19.0” x 16.3”)
Shipping Weight
6.9 kg (15.3 lb)
Net Weight
5.5 kg (12.2 lb)
Cooling System
Microprocessor controlled, variable speed fans, left to right air flow

 

GENERAL
 
Inputs (Control)
RJ-45 remote input for volume control using the CC-1 ControlCenter zone controllers, or for connection to the CV41. USB input for configuring the amplifier with PowerShare Editor software. Mute input control.
Visitors: 301,343